WWW.MEASURETEK.NET PS-103 Operation Manual Contents subject to change without notice Version 1.0 11/2011
PS‐103 www.measuretek.net .8. Serial Communication (continued) Meaning of Some Symbols: 0¯ ¯ ¯ ¯ Zero point is over the setting range0_ _ _ _
PS‐103 www.measuretek.net .1. General Information Read and understand all operating instructions before using this product. Keep this manual
PS‐103 www.measuretek.net .2. Display >0< - Scale is zeroed and gross weight is zero. Net - Display reading is net weight; tare is n
PS‐103 www.measuretek.net .3. Calibration Mode Note: A standard calibration weight of at least 10% of the scale’s rated capacity is required
PS‐103 www.measuretek.net .4. User Parameter Setup Mode 1. From normal weighing mode, press UNIT and ZERO/ON/OFF until “USer” is displayed. 2
PS‐103 www.measuretek.net .5. Serial Communication Before using the USB communication port, download the USB driver from http://www.mea
PS‐103 www.measuretek.net .6. Serial Communication (continued) weight measure cycle of the scale. One second is adequate for use as a time-out
PS‐103 www.measuretek.net .7. Serial Communication (continued) Serial Commands and Responses Command: S<CR> (53h 0dh) Response: <
Comments to this Manuals